The signature of "Response time measurement" is for measuring the response time of the scanning scope server.
The procedure is described below.
1. From the Web "Plan"> "Applied Signature" Selection, open the "System" category in the tree, select the signature for "Response time measurement" according to your purpose, and add it to the scanning plan.
· Types of the Signature for response time measurement
"Response time measurement": it can be applied for measuring response time.
"Response time measurement (XXXX milliseconds)": it can be applied for checking if the response time takes longer than XXXX milliseconds.
2. Execute the scanning from Web "Scan"> "Web scanning status".
3. Open the "System" category from Web "Results"> "Scanning results per Signature" and confirm the result.
The detection trigger shows the response time.
The response time took about 62 ms.