The number of scanning plans of signatures which target parameters increases in proportion to the number of parameters,and takes much time accordingly.
For example, there is a difference of more than 10 times between the request A includes 10 parameters and the request B includes 100 parameters.
To shorten the scan duration, apply the skip setting to some parameters that are similar to the other parameters.
The skip setting allows Vex to scan only some of parameters and skipping the rest.
1. Select the target log from Web "Scenario"> "Proxy log list" page.
2. "Log detail" tab> Request parameters tab, and check the box on the left.
*For checking all the parameters at once, use the "Skip batch setting" and "Skip batch cancel" buttons at the bottom of the page.
The scan is not conducted for the parameters applied the skip setting, which might need to take some action for skipped parameters referring to the scan result of the similar parameters.
It is recommend to scan all parameters as much as possible, but if the time is limited, this setting is helpful.